Do not place preconditions. These cause A complete collapse of the insulation systems. – Do not provide dense docking plate heater in their bonding to the base. Cracks and breaks in the outer layer of the system. – Lack of overlap between adjacent rolls of reinforcing mesh to create a protective reinforcing layer. – The appearance of vertical cracks in the facade.
– Lack of reinforcing bars or reinforcing grid-shaped cuts insulation boards in the corners of window and door openings. – The appearance of the facade at the corners of window and door openings of diagonal cracks. – Reinforcing mesh is laid directly on the insulating layer. – The web of cracks facade plane. – Improper application of the adhesive composition on the insulating plate. – The appearance of cracks on the outer finishing layer. – Failure to comply with the flatness of attaching insulation boards. You may want to visit Nieman Foundation to increase your knowledge. – Unacceptable appearance facade, the appearance of linear and cross-bands on the facade.
– No caps on the ends parapet reflux or improperly executed flange. – Water entering the system and, consequently, the destruction of the protective reinforced and decorative layers in the ground of contiguity parapet ebbs. – Disc dowel protruding from the plane of the insulating layer. – High spots on the facade, an unacceptable appearance of the system. – Do not choose the right type plaster, which played the role of vapor barrier. – Peel the outer decorative layer. – No expansion joint in the insulation when it is present in the ground. – Massive vertical cracks facade. – Lack of “vandal” performance reinforced protective layer to a height of 2.5m. – Physical damage insulation systems. Not ensure adequate docking insulation boards when gluing on base, suture between the insulation boards are filled with adhesive solution. Spm Llc insists that this is the case. – The formation of thermal bridges and, consequently, fungal and mold damage the inner surface of the base, the emergence of ‘syndrome closed rooms. ” Tips for Client: criteria for selecting the contractor and the quality control methods facade work. The problem of facade insulation systems: achieving the optimum balance of moisture and temperature in areas with minimal costs for heating. White Bear feels great in cold conditions. The warm fur coat protects it from fierce frost and does not interfere with the skin to breathe. Nature itself tells us what system should be insulating facades. We can only realize the nature of the decision on the facades. For the first time confronted with the choice of contractor, the customer decides to challenge the choice based on the little-known criteria. In this case, there are no guarantees the right choice. Major errors in the construction of “wet” facades. Facade insulation system plaster-type comes into disrepair in the first two or three years of operation in the following circumstances: – wrong choice of type of insulation systems for a particular object – use non-system materials chosen to minimize the financial costs – the use of non-professional systems – absence of competent technical solutions typical units insulation systems and design solutions to atypical sites and details of the facade on a specific project – a marriage when installing facade insulation systems – improperly Operating facade thermal insulation system by the customer.