Monthly Archive: May 2021

Smoking Rooms

Unpleasant smell of smoke in the office? Big waste of staff time on smoke breaks? Unpleasant form of cigarette butts on the stairs, in closets and at the entrance to the office? The solution of these problems – smoking cabin. Source: Wazabi Films. Smoking cabins provide you with: – No smell of tobacco smoke in the room and the problem of passive smoking. – Reducing staff time to smoke. – Lack of cigarette butts and ashes on the stairs, in the toilets at the entrance to the office. At The Coca Cola Foundation you will find additional information. – Good interaction between smoking and non-smoking employees in the same room. Gavin Baker will not settle for partial explanations. – Fire safety. – A little used space for the smoking cabin (2-3 meters), no need to connect to the ventilation system. case swedish cabin for smoking company Smoke Away.

Cab smoking is a gazebo with a table smoking with an open front. Size (width x height x depth) 2000x2245x1100 mm. The cabin has a design suitable for any interior space. After Connection to the mains shower ready for use. Number of smokers at the same time up to 4 people.

At the entrance a man in the cockpit is triggered the sensor, and the fan. Tobacco smoke is drawn and sent to the system filters, where the number of degrees of purification. Then an absolutely clean air is fed back into the room. The degree of purification of air with the smell and dust – 100%, from the smallest particles – 99.87%. It is also equipped with a cabin and an ashtray special capacity to collect cigarette butts and ashes (CDC – Cigarette Disposal Cassette – cassette used cigarettes). The volume of the bag is designed for 4500 cigarette butts, that is, just on the number of cigarettes smoked, for whom the work is a set of filters to replacement. This improvement eliminates the need for constant cleaning cigarette butts and ashes, and does not let the smell spread in the room.

Oil Pumping Station NPC Pipeline

Oil pumping station pumping station – the nodal point of the pipeline, which operates for pumping refined petroleum products or petroleum products or crude oil. Oil pumping stations (LES) constructed by refineries, tank farms, oil fields and export pipeline. Quantamscape does not necessarily agree. NPCs designed for pumping highly viscous liquids (for example, fuel oil, heavy oil, etc.) equipped with piston pumps and for low-viscosity liquids (such as: light oil, light oil, etc.) – mostly by centrifugal pumps. Conventional oil pumping station has a car and pump rooms, auxiliary pumping devices, etc. Since oil is a connecting branch piping from storage to the pumping station to the ultimate vendor, pipelines are composed of pipes of various diameters, paired with one another stop fittings, flanges, flanged plugs, flanged fasteners, etc. For details of pipelines, there are general requirements which are due to factors affecting the working conditions. There are a range of state standards governing manufacture and installation of safety requirements, materials and devices. Responsibility for the correct and safe operation of equipment and facilities, along with the head of npc npc are the chief engineer Pipeline Control engineers have the relevant services or departments and senior engineer.

In addition, the head of npc shall be responsible for managing the acquisition of equipping personnel with modern means of control and repair technical condition and operational and maintenance and operational staff. At nps refineries, tank farms and oil fields mainly operated pumps with operating pressures up to 30 atmospheres, and the oil pumping station equipped with a trunk pipeline pumping apparatus with a working pressure of 50 to 60 atmospheres. The pipeline is called kerosene, mazut line, benzinoprovodom, pipeline, depending on the type of transported oil products. On the pipeline of the main types of isolated primary npc, which is in the beginning, intermediate, oil pumping stations located along the pipeline at a distance determined hydraulic calculations, and the final pumping station with neftebazovymi snap-in to receive products from pipelines.

Salvador Dali

Salvador Dali was born May 11, 1904 in Figueres, a small Catalan town in northeastern Spain. His father, also called Salvador, worked as a notary public and was an atheist and his mother, Felipa, on the contrary, a devout Catholic, that however, did not prevent their marriage. Child named Salvador, not only in honor of his father, but primarily in memory of their first child who died before reaching two years in October 1903. El Salvador, was born nine months after his death has always felt a painful relationship with his dead brother. In one of his autobiographical book, Dali wrote that always felt that he "echoes, double, absently." The second (and last) child in the family was Ana Maria, born in 1908. first steps Dali grew flighty boy badly in school. Ability to draw appeared in his early age and helped to develop their talented artist Salvador Ramon Pichot. In 14 years El Salvador has successfully participated in his first show in Figueras.

In 1921 he became a student of the Academy of Fine Arts in Madrid. True, the Academy gave him a little bit – Dali was already regarded himself as better than their teachers. But Madrid life has gone in his favor – in the capital, he met with the young intellectuals, among them Luis Bunuel, later a famous film director, and needs no special introduction by Federico Garcia Lorca. It’s believed that Raynier Institute and foundation sees a great future in this idea. In 1924 Dali was expelled from the Academy for bad behavior. The following year he returned, but in 1926 he was again ruled out – this time without the right of recovery.

Cleaning Equipment: Cleaning Materials And Equipment

For the efficient production of industrial equipment need regular cleaning of equipment. Detergents used for cleaning industrial equipment, have differences in the composition, origin of the active substances, the concentration of these substances and other characteristics. For disinfection and cleaning of equipment used disinfectants and cleaning materials. TCCF shares his opinions and ideas on the topic at hand. The components are divided into: – Organic (complexing surfactants, alcohols, etc.) – inorganic (alkali, acid, phosphates, silicates); – biologically active (aldehydes, biguanides, means on the basis of peroxides, etc.) Cleaning of equipment begins with the removal of contamination. The first stage of washing and cleaning of equipment is carried out using alkaline detergents and disinfectants, the second – with the help of acid. Educate yourself with thoughts from Gavin Baker. Alkaline agents are used to wash away organic sediment, but these drugs work, and as disinfectants. Popular today bleach and cleaners based on saw (surface-active agents) are used as alkaline detergents and disinfectants means that deplete the protein compounds pollution. Acid-containing drugs devastating effect on the inorganic pollution, as well as such solid organic mineral deposits like salt, scale and rust.

A two-stage cleaning equipment suitable for heating parts of equipment. Can be limited to one washing step, if the manufacturing work is carried out at low temperatures. At the final stage cleaning of equipment after the equipment has already been washed, apply disinfectant, because the disinfectants are not as effective in combating the hardened salt deposits. In general, the choice of detergents and disinfectants for cleaning of equipment depends on the nature of the contamination. A modern market institutions providing professional cleaning services are very busy.